Semi clear tanks make guessing at juice level a thing of the past.
The "no filler" concept of juice feeding straight from the tank onto the heating element of the atomizer makes for an almost direct drip experience and produces great clouds of vapor!
The tank holds approx .5 ml of juice and is easily filled through a cap which pops off the bottom.
The bottom of the tank is the fatter end which has a cap.
Gently pop it off - first time might be tight - and fill with juice.
Once filled (a couple of drops shy of the top) and recapped tightly, insert the tank cap side down into the specialized 510-T atomizer. You will hear or feel a pop when the tank is seated.
A needle plate in the base of the atomizer pierces the center hole of the tank cap.
Give the tank a bit of a twist to make sure it has been pierced and is sitting securely.
Allow a few moment for a bit of juice to flow out of the tank and wet the heat element of the atomizer.
Screw the tank/atty onto a fully charged 510 battery.
Hold it up to your ear, press the button of the battery for a moment and listen for a sizzle.
You are good to go.
Now vape away your favorite juice.
Included:
(2) 510 180 mah Manual Batteries - Black
(1) 510-T Atomizer
(5) 510-T Tank Cartridges - clear
(1) 510 mini USB battery charger
(1) 510-T Users Manual
The tanks included are empty - no liquid nicotine in this kit.
Remember to only use 510-T atomizers and 510-T Tank Cartridges - standard 510 carts or attys will not adapt to the tank system.
The included charger is only to be used to charge the included batteries.
Using the charger to charge other batteries may result in damage to the batteries and the charger.
NOTE: many atomizers ship with a bit of preservative to keep them wet. Blow out that
preservative onto a paper towel through the battery end before assembling your PV.
NOTE: thick juices may not be very well suited for this style of tank vaporizer since they will not flow through the bottom hole of the cap well. Experiment a bit to find the juice that works best for you.
